DIY Driftwood Hanging
Tools and Supplies:
Arrange Driftwood pieces. (I like to be somewhat random. You can arrange them any way that pleases you.)
Drill a single hole through the center of each piece.
Measure the length of the hanging sculpture and cut the wire with room to spare on each end. (the length will vary according to how big you make the loops and how long you want it to hang down)
Insert cable through the center holes.
Place ferrules onto cable
loop cable back through the ferrules
Cramp ferrules onto the cable with pliers
Insert the cable wire through the cable ferrules and back up through the ferrules and cramp it tightly with pliers
Hang it somewhere!